產品名稱：地下水自動記錄儀
品牌：Solinst
產地：加拿大
型號： Levelogger 5 LTC 3001


Levelogger 5 LTC 在一個緊湊的包裝中記錄水位、溫度和電導率，電池壽命長達 8 年，保修期長達 3 年。



液位、溫度、電導率：
Levelogger5 LTC記錄水位、溫度和電導率。它在一個 22 mm x 208 mm (7/8" x 8.2") 的小型防水外殼中結合了數據記錄器、8 年電池、Hastelloy 壓力傳感器、溫度檢測器和電導率傳感器。采用聚合技術的烘烤涂層可保護車身免受腐蝕、磨損和高溫的影響。電導率傳感器是 4 電極鉑傳感器，具有自動量程功能。維護**少的密封 Levelogger 5 LTC 易于清潔和校準，即使在現場也是如此。

 

升級功能：

• 增加內存：10萬組數據
• 通訊更穩定：單眼光學，易清潔，更耐刮花
• 更堅固、更堅固的設計：雙 O 型圈密封，超過額定壓力的兩倍
• 更好的熱敏電阻和電導率靈敏度：升級的鉑 RTD 和電導率傳感器
• 在惡劣條件下提供出色的保護：使用聚合的烘烤涂層——從里到外

 
 

人性化操作：
軟件校準和數據向?qū)е笇瓿呻妼市屎蜌鈮貉a償，確保數據集準確。數據向?qū)н€將電導率讀數轉換為比電導率 (@ 25ºC)。

Levelogger 軟件允許您輕松編程您的偏好、下載數據并以圖形或表格格式顯示數據或?qū)С龅狡渌绦?。實時查看選項允許即時查看實時電導率、水位和溫度讀數。

水平儀易于部署；使用直讀電纜或電纜/繩索懸掛安裝。Levelogger 5 LTC 使用 Solinst SDI-12 接口電纜兼容 SDI-12。

使用新的 Field Reader 5、DataGrabber 5 USB 數據傳輸設備或使用 Levelogger 5 應用程序界面和您的智能設備通過藍牙® 在現場下載數據。將 Levelogger 5 LTC 與使用**新無線技術的 Solinst 遙測系統集成。

 

Levelogger 5 LTC 應用程序：

• 鹽水入侵和土壤鹽漬化監測
• 羽流修復監測和研究
• 垃圾填埋場、礦山尾礦、廢物處理儲存場所等處的滲濾液監測
• 農業和雨水徑流監測
• 為飲用水供應監測創建歷史數據庫
• 示蹤劑測試

 

生物污垢屏幕：

可選的Biofoul Screen為 Levelogger 5 LTC 壓力和電導率傳感器在惡劣環境中提供額外保護。

長時間使用 Levelogger 5 LTC 時，壓力傳感器和/或電導率電池存在生物污染的風險，這可能會影響其讀數。
Biofoul Screen旨在減少傳感器上不必要的微生物、植物、藻類或生物體（如藤壺和貽貝）堆積。Biofoul Screen 由一個用銅線包裹的 Delrin 套管組成。滑到 Levelogger 5 LTC 的傳感器端，通過壓合將其固定到位。
利用銅的天然防污特性，Biofoul Screen 是一種經濟實惠的選擇，可延長 Levelogger 5 LTC 的部署時間。它減少了現場訪問和清潔 Levelogger 所花費的時間，并通過確保準確的傳感器測量來提高長期性能。



Levelogger 5 應用界面：
Solinst Levelogger 應用程序旨在通過您的智能設備與 Solinst 數據記錄器進行通信。編程選項包括啟動/停止、數據下載、線性和實時采樣、未來啟動/停止和 GPS 坐標。

Levelogger 5 應用程序界面使用藍牙無線技術與運行 Solinst Levelogger 應用程序的智能設備連接。使用我們的 Levelogger 5 應用程序接口和 Solinst 直讀電纜與井下 Levelogger 通信，并直接從現場通過電子郵件發送數據文件。




Levelogger 5 LTC參數：

液位傳感器：    帶有哈氏合金傳感器的壓阻硅
范圍：    5、10、20、30、100 和 200 m
準確性：    ±0.05% 滿量程
解決：    0.001% FS 至 0.0006% FS
計量單位：    cm, m, ft, psi, kPa, bar (ºC, ºF)
正?；?nbsp;   自動溫度補償
溫度補償范圍：    0ºC 至 50ºC
溫度感應器：    鉑電阻溫度檢測器 (RTD)
準確性：    ±0.05ºC
解決：    0.003ºC
電導率傳感器：    4電極鉑
全系列：    0 至 100,000 μS/cm
校準范圍：    50 至 80,000 μS/cm
準確性：    ±1%：5,000 µS/cm – 80,000 µS/cm；大于 ±2% 或 15 µS/cm：50 µS/cm –5,000 µS/cm
解決：    ±0.1 μS/cm
溫度補償范圍：    0ºC 至 50ºC
正常化：    比電導@ 25?C
電池壽命：    8 年（每 5 分鐘閱讀 1 次）
時鐘精度：    ±1 分鐘/年（-20ºC 至 80ºC）
工作溫度：    -20ºC 至 80ºC
**讀數：    100,000組讀數
記憶：    板巖或連續
溝通：    光纖高速：57,600 bps，帶 USB
尺寸：    22 毫米 x 208 毫米（7/8" x 8.2"）
重量：    197 克（6.95 盎司）
耐腐蝕性能：    使用聚合的烘烤涂層
潤濕材料：    鉑金、Delrin®、Viton®、316L 不銹鋼、哈氏合金、經監管機構批準的無 PFAS PTFE（內外）
采樣模式：    線性、事件和 用戶可選擇重復模式、未來開始、未來停止、實時視圖
測量率：    2 秒到 99 小時
氣壓補償：    軟件向?qū)Ш?Barologger 5
 

LTC 型號            滿量程 (FS)                       準確性                                解決
M5、C80          5 米（16.4 英尺）            ± 0.3 厘米（0.010 英尺）    0.001% FS
M10、C80        10 米（32.8 英尺）          ± 0.5 厘米（0.016 英尺）    0.0006% FS
M20、C80        20 米（65.6 英尺）          ± 1 厘米（0.032 英尺）       0.0006% FS
M30、C80        30 米（98.4 英尺）          ± 1.5 厘米（0.064 英尺）    0.0006% FS
M100、C80     100 米（328.1 英尺）        ± 5 厘米（0.164 英尺）      0.0006% FS
M200、C80     200 米（656.2 英尺）        ± 10 厘米（0.328 英尺）    0.0006% FS




中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：


Level, Temperature, Conductivity：
The Levelogger5 LTC logs water level, temperature, and conductivity. It combines a datalogger, 8-year battery, Hastelloy pressure sensor, temperature detector, and conductivity sensor within a small waterproof housing, 22 mm x 208 mm (7/8" x 8.2"). A baked-on coating using polymerization technology protects the body against corrosion, abrasion and high temperatures. The conductivity sensor is a 4-electrode platinum sensor, with autoranging capabilities. The minimal-maintenance, sealed Levelogger 5 LTC is simple to clean and calibrate, even in the field.

 

Upgraded Features：
Increased memory: 100,000 sets of data
More stable communication: single-eye optical, easy to clean, more scratch resistant
Stronger, robust design: double o-ring seals for two times over pressurization rating
Better thermistor and conductivity sensitivity: upgraded platinum RTD and conductivity sensor
Superior protection in harsh conditions: baked-on coating using polymerization—inside and out
 



Level Sensor:    Piezoresistive Silicon with Hastelloy Sensor
Ranges:    5, 10, 20, 30, 100, and 200 m
Accuracy:    ±0.05% FS
Resolution:    0.001% FS to 0.0006% FS
Units of Measure:    cm, m, ft, psi, kPa, bar (ºC, ºF)
Normalization:    Automatic Temperature Compensation
Temp Compensation Range:    0ºC to 50ºC
Temperature Sensor:    Platinum Resistance Temperature Detector (RTD)
Accuracy:    ±0.05ºC
Resolution:    0.003ºC
Conductivity Sensor:    4-Electrode Platinum
Full Range:    0 to 100,000 μS/cm
Calibrated Range:    50 to 80,000 μS/cm
Accuracy:    ±1%: 5,000 µS/cm – 80,000 µS/cm; greater of ±2% or 15 µS/cm: 50 µS/cm –5,000 µS/cm
Resolution:    ±0.1 μS/cm
Temp Compensation Range:    0ºC to 50ºC
Normalization:    Specific Conductance @ 25?C
Battery Life:    8 Years (1 reading every 5 minutes)
Clock Accuracy:    ±1 minute/year (-20ºC to 80ºC)
Operating Temperature:    -20ºC to 80ºC
Maximum Readings:    100,000 sets of readings
Memory:    Slate or Continuous
Communication:    Optical high-speed: 57,600 bps with USB
Size:    22 mm x 208 mm (7/8" x 8.2")
Weight:    197 grams (6.95 oz)
Corrosion Resistance:    Baked-on coating using polymerization
Wetted Materials:    Platinum, Delrin®, Viton®, 316L Stainless Steel, Hastelloy, Regulator approved PFAS-free PTFE (inside and out)
Sampling Mode:    Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View
Measurement Rates:    2 seconds to 99 hours
Barometric Compensation:    Software Wizard and Barologger 5
 

LTC Models    Full Scale (FS)    Accuracy        Resolution
M5, C80        5 m (16.4 ft.)    ± 0.3 cm (0.010 ft.)    0.001% FS
M10, C80        10 m (32.8 ft.)    ± 0.5 cm (0.016 ft.)    0.0006% FS
M20, C80        20 m (65.6 ft.)    ± 1 cm (0.032 ft.)    0.0006% FS
M30, C80        30 m (98.4 ft.)    ± 1.5 cm (0.064 ft.)    0.0006% FS
M100, C80    100 m (328.1 ft.)    ± 5 cm (0.164 ft.)    0.0006% FS
M200, C80    200 m (656.2 ft.)    ± 10 cm (0.328 ft.)    0.0006% FS
 

User-Friendly Operation：
Software Calibration and Data Wizards guide you through conductivity calibration and barometric compensation, ensuring accurate data sets. The Data Wizard also converts conductivity readings to Specific Conductance (@ 25ºC).

Levelogger Software allows you to easily program your preferences, download data, and display data in a graph or table format or export to other programs. The Real Time View option allows immediate viewing of live conductivity, water level and temperature readings.

Leveloggers are easy to deploy; install with direct read cables or wireline/cord suspension. The Levelogger 5 LTC is SDI-12 compatible using the Solinst SDI-12 Interface Cable.

Download data in the field using the new Field Reader 5, DataGrabber 5 USB data transfer device, or through Bluetooth® using the Levelogger 5 App Interface and your smart device. Integrate the Levelogger 5 LTC with Solinst Telemetry Systems, which use the latest wireless technologies.

 

Levelogger 5 LTC Applications：
Salt water intrusion and soil salination monitoring
Plume remediation monitoring and studies
Leachate monitoring at landfills, mine tailings, waste disposal storage sites, and more
Agricultural and stormwater runoff monitoring
Create a historical database for potable water supply monitoring
Tracer tests
 

Biofoul Screen：
An optional Biofoul Screen provides extra protection for the Levelogger 5 LTC pressure and conductivity sensors in harsh environments.

When a Levelogger 5 LTC is deployed for an extended period, there is the risk of biofouling on the pressure sensor and/or conductivity cell, which can compromise their readings.

The Biofoul Screen is designed to reduce the unwanted buildup of microorganisms, plants, algae, or organisms such as barnacles and mussels, on the sensors. The Biofoul Screen consists of a Delrin sleeve wrapped with copper wire. Slip onto the sensor end of a Levelogger 5 LTC, where it is held in place by compression fit.

Using the natural anti-fouling characteristics of copper, the Biofoul Screen is an affordable option to lengthen the time a Levelogger 5 LTC can be deployed. It reduces site visits and time spent cleaning Leveloggers, and improves long-term performance by ensuring accurate sensor measurements.

 

Levelogger 5 App Interface：
The Solinst Levelogger App is designed to communicate to Solinst dataloggers via your smart device. Programming options include start/stop, data downloading, linear and real-time sampling, future start/stop, and GPS coordinates.

The Levelogger 5 App Interface uses Bluetooth wireless technology to connect with your smart device running the Solinst Levelogger App. Use our Levelogger 5 App Interface and a Solinst direct read cable to communicate to a downhole Levelogger and email data files right from the field (see Model 3001 Solinst Levelogger 5 App Interface data sheets).